INA Bearings temperature, generally outside of the Bearings room temperature can be inferred, if the hole can be measured directly INA Bearings outer ring temperature is more appropriate.
 Typically, the INA Bearings with the Bearings operating temperature slowly began to rise after 1-2 hours to reach steady state. The normal temperature of the Bearings due to the heat capacity of the machine, heat dissipation, speed and load. Lubrication, suitable mounting part, abrupt Bearings temperature will rise, there will be unusually high temperatures, then have to stop running, take the necessary precautions.
Using the thermal sensor can always monitor the Bearings operating temperature, and alarm or stop automatically when the temperature exceeds the specified value to prevent the burning shaft accident occurred.
High temperature is often said that the Bearings is in an abnormal situation. The high temperature also harmful to the INA Bearings lubricant. Sometimes Bearings overheating can be attributed to the lubricant in the Bearings. Bearings more than 125 ℃ temperature long-term even transfer to reduce Bearings life. Caused by high temperature Bearings the reasons include: lack of lubrication or excessive lubrication, lubricants. Containing impurities, the load is too large, Bearings loss of the ring, lack of space, and oil seals produce high friction.
Continuous monitoring of the INA Bearings temperature is necessary, Bearings either the Bearings of the measurement or other important parts. If you are under the same operating conditions, any temperature change has failed.
Regular Bearings temperature measurement by means of a thermometer, such as digital thermometers, accurate measure Bearings temperature and in accordance with the given unit of ℃ or Fahrenheit display. The importance of Bearings, which means that when it is damaged, can cause equipment downtime, so these Bearings should preferably be the installation of temperature probes. Under normal circumstances, the Bearings will be just lubrication or lubrication after natural temperature rise and lasts one to two days.
INA Bearings, the operating temperature above 150 ° are usually called high-temperature Bearings, chromium Bearings steel using the temperature exceeds 150 °, and its hardness will be a sharp decline in the size of unstable, so that the Bearings does not work properly. Therefore, the working temperature of 150 ° to 350 ° under the conditions of work Bearings rings and rolling element still use ordinary carbon chromium Bearings steel, the Bearings parts special tempering process, should generally be higher than the operating temperature 50 ° tempering. Bearings steel tempered in accordance with the above requirements, the normal operating temperature. However, tempering the hardness decreased, decreased Bearings life.


Other News:
Check the details of SKF bearings sound and routine maintenance
INA Bearing the important role of the periodic internal inspection
INA Bearings temperature cause
Improve the results achieved by structural SKF bearings
FAG bearing material should have performance
TIMKEN bearing the ultimate bearing capacity analysis
TIMKEN bearings installed preparatory work before
NSK bearing clearance choose should pay attention