Bearings are precision parts, thus quite cautious attitude when in use, that is, change is the use of high-performance SKF bearings, if used improperly, they can not achieve the expected performance, and easy to make the SKF bearing damage. Therefore, the use of SKF bearings should note the following:
1, to maintain the cleanliness of the bearing and its surroundings
    Even if invisible to the naked eye smile dust from entering the SKF bearings, will increase the bearing wear, vibration and noise.
2, using the installation to be carefully
    Does not allow a strong punch, does not allow a direct hit with a hammer, SKF bearings, does not allow pressure by rolling the body pass.
3, the use of appropriate, accurate installation tool
    Try to use a special tool, try to avoid using the cloth and staple fiber and the like.
4, to prevent the corrosion of the SKF Bearing
    Hand pick SKF bearings, necessary to fully wash away the sweat of the hands, and coated with high quality mineral oil and then operate, with particular attention to anti-rust in the rainy season and summer.
    However, in some special operating conditions, SKF Bearings can get longer life in the traditional computing, especially in the case of light load. These special operating conditions, when the rolling surface (track and rolling) to be an effective lubricant film separated and limit pollutants may cause surface damage. In fact, under ideal conditions, the so-called permanent bearing life is possible.


Other News:
NSK bearing clearance choose should pay attention
What factors affect the SKF bearing life
Affect the normal operation of the TIMKEN bearing failure treatment
According to INA bearing groove sound processing failure
INA Bearing the process of using common inspection methods
And temperature oscillation in the operation of INA Bearing damage
Industrial SKF bearings installation maintenance and lubrication maintenance knowledge
SKF Bearing replacement of grease to maintain the adjustment technology