TIMKEN bearings equipment lubrication management is an important branch of the bearing device management, good lubrication to extend the life of TIMKEN bearings, and to improve its operation rate, to reduce the incidence of failure, and conducive to the production carried out smoothly. On the contrary, it will greatly improve the result in the failure rate of TIMKEN bearings, the number of shutdowns and downtime will increase, so that the inconvenience to the production, can cause severe production tasks can not be completed, and significant losses.
As we all know, oil and grease lubrication TIMKEN bearings within smooth agent. Bearing overhaul must be rigorous, method of operation according to a certain requirement to perform. Bearing overhaul preparatory items include a dry towel, tip clamp, TIMKEN bearings cleaning night, TIMKEN bearings smooth oil or smooth, grease, etc..
Boring phenomenon, put TIMKEN bearings from the cleaning fluid to get into, and with a dry towel to wipe the cleaning fluid, then placed in the shade to dry.
TIMKEN bearings used in the cleaning solution Note: Bearing soaked TIMKEN bearings in the market to buy cleaning fluid, TIMKEN bearings within the foreign bodies in the swing will swing into. Some of the store to buy ultrasonic cleaning machine is also useful to eliminate foreign matter sponsorship.
Injected into the smooth agent, in accordance with the trend to TIMKEN bearings into the grease or oil, cover guard ring partial from the Xin'an the C font. All kinds of lubricating base oil in addition to the rest of the Different viscosity grades are the same, only difference is added in its variety and quantity of ingredients. It is generally divided according to the type and quantity of the added ingredients to the oil varieties and quality grades. The types of additives different lubricants can not be mixed use, otherwise you can make oil additives react chemically damage the lubricant the desired effect.
Use dry towel to remove the C-shaped ring and guard TIMKEN bearings inside the dirty stuff to wipe again with sharp pliers to mention live side of the C-shaped ring, the C-shaped ring guard to take the next.
Finally, the detection of bearing. TIMKEN bearings have been assembled into the original situation with your fingers grasp the inner backward line several times rotation, if no problem, just overhaul good.


Other News:
What are the TIMKEN bearings have been lubricated maintenance
Preparations for SKF bearings are mounted and attention problems
SKF bearings lubrication of Raceway noise effect
TIMKEN bearing the use of judgment and the loading and unloading force points
INA bearings vibration analysis of causes to loss
SKF bearings Assembly and disassembly time force points way to avoid failure
Analysis of the relationship of the limit speed of NSK bearings and friction coefficient
INA bearings damage degree judgement skills