1. the decommissioning of the former relationship be established INA bearings and associated parts: look closely at the bearing location and associated relationships, analysis of the installation process and methods, and to develop methods and procedures for the demolition.
2. without disassembly of trying not to split: split INA bearings, and outer rings are usually using an interference fit, to make sure that the fitting accuracy, shorten repair duration, can not remove as far as possible without removal.
3. the use of scientific methods of disassembly:
(1) remove the axle should be applying pressure on the inner ring, demolition of INA bearings in rolling mill bearing seat should force on the inner ring.
(2) when removing the inner or outer ring of the bearing, force should be evenly balanced, shall not be skewed to prevent blockage.
(3) when removing INA bearings, must not be used as objects for the breakdown of the rhythm, you must use dedicated removal tool removal or discharge pressure, individual cases can also be used copper rods or other soft metal gasket and rap.


Other News:
INA bearing concrete removal methods
From Visual inspection of INA bearing quality considerations
INA bearing installation should pay attention to what
SKF bearing vibration temperature anomalies of the elimination method
SKF bearings damage is particularly serious when the noise
After the operation of heating problem of SKF bearings checks
Problems of bearings FAG bearings
FAG bearings sealed using common materials