NSK Bearings Front Code Meaning
F - deep groove ball bearings with flanged outer ring (for d <10 mm), for example: F605.
HR - high load tapered roller bearings, for example: HR30207J.
NSK Bearings Rear Code Meaning
A - interior design and standard bearings.
A - angular contact ball bearings, the contact angle of 30 degrees.
A5 - angular contact ball bearings, the contact angle of 25 degrees
Z, ZS - side with steel dust cover.
ZZ, ZZS - both sides with steel dust cover.
D, of DU - side with a contact rubber seals.
C1 - Radial Bearing radial clearance smaller than the C2 clearance.
C2 - Radial Bearing radial clearance, clearance than the standard.
CN (omitted) - Radial Bearing radial standard clearance.
C3 - Radial Bearing radial clearance, clearance than the standard.
C4 - Radial Bearing radial clearance than C3 clearance.
A deep groove ball bearings
ZZ: iron dust cover (with 2Z)
VV: Non-contact rubber seals (with 2RZ)
DDU: contact rubber seals (with 2RS)
C3/C4: clearance
M: copper cage
T1X: rolling element guide polyamide resin cage
P5: Accuracy
(2) aligning ball bearings
K: with a tapered bore (taper 1:12)
K30: with a tapered bore (taper 1:30)
(3) Spherical Roller Bearings
EA / C / CD: Steel Cage
The CA / CAM: copper cage
E4: with a tank on the outer ring (outer diameter side) with hole
S11: use temperature of 200 degrees below
K/K30: with a tapered bore (taper 1:12 / 1:30)
4 Tapered Roller Bearings
C: in the taper
D: large taper
(5) Cylindrical Roller Bearings
ET: Nylon Cage
M: copper cage
W: Steel Cage
C3: clearance
E: Enhanced
TP: PPS resin outer ring guided cage, and extreme temperatures of 240 degrees
TB: roller guide the PPS resin cage
MR: rolling element guidance copper alloy cage, and extreme temperatures of 300 degrees
KR: taper 1/12 tapered bore
The E44: the outer ring with the standard tank, hole
CC1: Cylindrical bore the standard clearance
CC0: cone hole using the standard clearance
CCG: Special radial clearance
P4/P5: Accuracy
(6) angular contact ball bearings
A/A5/C: 30/25/15 degree angle
TYN: polyamide resin cage
SU / DU: universal combination of single row / 2
DB / DF / DT: combination of back-to-back / face to face / side by side
DBD / DFD / DTD: 3 column combination
DBB / DFF / DTT: 4 combination of columns
EL / L / M / H: pretension micro / light / medium / heavy
P4/P5: Accuracy
7 ball screw support bearings
TAC: the contact angle of 60 degrees
SU / DU: universal combination of single row / 2
DB / DF / DT: combination of back-to-back / face to face / side by side
DBD / DFD / DTD: 3 column combination
DBB / DFF / DTT: 4 combination of columns
C10/C9: standard preload / light preload
PN7A/PN7B: standard precision / accuracy (SU combination only) equivalent to P4
8 thrust angular contact ball bearings
TYN: polyamide resin cage
DB: back-to-back combination
EL / L: Micro / light preload
P4A: outside diameter size of special, the other for the P4 level



Other News:
nsk bearing code meaning
Why sometimes occurs in the normal functioning of the TIMKEN bearing tip song
SKF bearing service life extension method
NSK Bearings Suffix Code Meaning
Introduction to NSK bearings are common causes of damage
SKF bearing method of determining whether it should be replaced
Germany FAG Bearing types are specified
INA bearing noise and noise protection