Bearings are precision parts, thus quite cautious attitude when in use, that is, change is the use of high-performance timken bearings, if used improperly, they can not achieve the expected performance, and easy to make angular contact ball bearing damage. Therefore, the Eastern Hemisphere hardware network professionals recommend the use of bearings should be aware of the following:
General grease lubrication, cleaning bearings, directly populate grease. Oil lubrication, generally do not have to clean, but, apparatus, or high-speed bearings, use clean oil cleaning, anti-rust agent to remove the coating on the bearing. Remove the rust inhibitor of angular contact ball bearings, easy to rust, it can not be left unattended.
First, when using the installation carefully does not allow a strong punch, does not allow direct percussion with a hammer bearing, does not allow the pressure by rolling the body pass.
Second, the use of appropriate and accurate installation tools to make use of special tools, try to avoid using the cloth and staple fiber and the like.
To prevent corrosion of angular contact ball bearings by hand directly pick up bearing the hands to wash away the sweat and coated with high-quality mineral oil and then operate, with particular attention to anti-rust in the rainy season and summer.
Fourth, to maintain the bearing and its surroundings clean, even if invisible to the naked eye smile dust timken bearings and bearing wear, vibration and noise will increase.
However, in some special operating conditions, Timken bearings can be obtained for a long life in the traditional computing, especially in the case of light load. These particular operating conditions (Buy the bearings are to note) is, when the rolling surface (track and rolling) was an effective lubricant film separated and limit pollutants may lead to surface damage. In fact, under ideal conditions, the so-called permanent angular contact ball bearing life is possible.


Other News:
Teach you to easily solve the corruption problems of the timken angular contact ball bearings
Factors contributing to shortened service life of INA self-aligning ball bearings have?
INA bearing burn failure of three major factors overview
How to identify whether INA cylindrical roller bearings can be used again
SKF bearing temperature check processing and methods
Factors leading to shortened service life of SKF cylindrical roller bearings have which?
Identify three methods of quality of SKF deep groove ball bearings and use the selection
SKF bearing parts and components in the production process of technical analysis