When expansion matching rings mounted on the shaft or loaded when a person in the housing, you must ensure that the process can be completed quickly and smooth. If the ring in collaboration with the reach requirements position may disorder or stop moving, relocating the ring to tie in with the location correctly can be difficult.
As notes above, sleeves or shirk is used to install the bearings with a tapered bore on cylindrical axis. Bearings with a tapered bore can be mounted directly on tapered shaft. However, these methods are not technically press fit or inflation meet, the resulting axis but with those with press fit methods are similar, but in some cases, these methods are much more convenient.
1th, you want to keep the NSK bearings and its surrounding environment clean
Saying this I do not have to know about it, even the invisible dust into the bearings, also bearing wear, to put it plainly, eye rubbing may not the slightest sand, is a reason!
2nd, be careful and accurate when using install installing
We would not even so that common sense is not right, if not, then don't do the bearing, to go home to play it, the most important thing is do not allow powerful punch, do not allow direct percussion with a hammer bearing, not afraid of smashed, you have hit the deformation, do they bear the loss, haha, also pass through the body pressure is not allowed.
3rd, using appropriate and accurate installation tools
Using special tools as much as possible, avoid using things like cloth and fiber.
4th, the prevention of corrosion of NSK bearings, not blisters
Bearing is fine steel do of, but also fear water, if does not letter, you placed in water in the bubble 's, Oh, with hand took take NSK bearing Shi, to full wash to hand Shang of sweat, and coated to quality mineral oil Hou again for operation, in rainy season and summer especially to attention rust, don't told I said rust fear what, good 's, you own try try 's, look at rust will is what results!　
Correct choice of tie, you must know the actual loading conditions of NSK bearings, temperature and other requirements, and is actually very difficult. Therefore, in most cases is selected based on using refinements meet.


Other News:
Expansion of the NSK bearings fit skills attention to four points
NSK bearing configuration effects on the rigidity of bearings
Causes of speed limit about the TIMKEN bearing noise
Security notices in stable operation using TIMKEN bearings
Judging fault maintenance method of FAG bearings in use
INA bearing track maintenance method of clearance measurement
Resolve of NSK bearings burn the correct lubrication method
Important factors in NSK bearing cage fracture