Bearing the name of FAG NJ318E + HJ318E
New Model NJ318E + HJ318E
Old Model 62318E
Inner diameter d (mm) 90
Outer diameter D (mm) 190
Thickness B (mm) 43
Brand Model NJ318E? TVP2 + HJ318E
Brand FAG
Category cylindrical roller bearings
Describe Single-wall and the inner ring with Angle ring cylindrical roller bearing (NJ 0000 + HJ 0000 type)
Cylindrical roller the configuration bearing FAG bearing configuration of the bearing stiffness is also great, generally, to heart thrust ball bearings and roller bearings used in pairs should take the outer ring of large end relative (ie the pressure lines constitute the pressure cone tip outwardly) configuration, configured such that the bearing anti-subversion torque capacity less change when the temperature changes, adjusting the amount of preload.
FAG bearings supporting manner under the conditions permitted by the axial position of each fulcrum two or two or more of the bearing as a radial bearing, the supporting rigidity can be improved. E.g. recent member of the machine tool spindle, it is widely adopted to installation, to the axial preload as a fulcrum of the same sets of radial thrust bearing of the shaft support.


Other News:
FAG bearings NJ318E + HJ318E cylindrical roller bearings
FAG 23122CC/W33 spherical roller bearings
INA 23096CACK/W33+H3096 spherical roller bearings
SKF bearing normal inspection matters
SKF bearing material requirements
SKF bearing basic points to be noted
The NSK bearings appearance quality checks
Introduction of stable operation of FAG bearings method