TIMKEN bearings normally used in low speed under overload conditions, maintenance and charging or running parts of the lubricating oil difficulties.
How to reasonably TIMKEN bearing installation and maintenance of it, usually to pay attention to what elements? Bearing in the maintenance process must focus on cleaning, lubrication and so on a series of questions.
TIMKEN bearings in the production of industrial machinery is the more common type of bearing, bearing installation, maintenance, attention to the elements are as follows:
1 install, TIMKEN bearing to ensure trunnion bearing hole rotational flexibility, accuracy and smooth. Due to the TIMKEN bearing maintenance is too much trouble, so at the time of installation to ensure bearing installation completely correct, error-free. Keep the bearing can be up and running without error.
2, attention to the smooth flow of oil, oil and oil bath connected. Scraping the tank when the Institute of ideas on both sides to be soft, to form an oil film, ideas on both sides evenly to prevent oil spills. Add a lubricant to facilitate the maintenance at a later stage. Facilitate maintenance.
3, bearing and bearing block hole to repair scratch posted solid bushing 0.05~0.1mm higher subdivision surfaces, so tightly. When overall bearing pressure to prevent skewed, with fixing screws. Bearing during the installation process if deviation will lead to seize up, caused the deformation of the shaft, destruction of machinery and equipment.
4, attention to cleanliness, scraping the debugging process where it can be found in oily parts, cleaning oiled after shave repair. Bearing installation clean before, ensure that the TIMKEN bearings clean, even extremely small impurities can cause bearing damage.
5, TIMKEN bearings should always check lubricated during use, heat, vibration issues. In case of fever, smoke, a card dead as well as abnormal vibration, noise, and so you want to check in a timely manner, there are a series of failures to parse, and then take appropriate measures based on analysis of specific situations. Try to avoid causing unnecessary damage.


Other News:
TIMKEN bearing installation and maintenance methods
INA bearing vibration and noise of the concept
Getting ready for a TIMKEN bearing installation
INA bearing lubricants which
TIMKEN bearing the working characteristics and common materials
Grinding force resulting from the TIMKEN bearing metamorphic layers
TIMKEN bearing carburizing steel material using presentation
TIMKEN bearing wear analysis in the motor