1.INA bearing high temperature led to the phenomenon:
(1) may be interrupted by the INA Bearing cooling water, generated at a high temperature.
(2) may the INA bearing oil, waste oil deterioration or run CPC degradation. Oil, such as water and oil will lead to increased acidity increase will reduce oil lubrication, bearing corrosion, temperature, caused by the phenomenon of INA bearings.
2 What will happen when the INA Bearing temperature?
(1) alarm bell will ring.
(2) machine next to the dish water wheels mechanical failure light plate light, the instrument bearing temperature indicator temperature increase, signal relay.
(3) the thermometer the plate (intumescent thermometer) black and yellow needle overlap or exceed the yellow needle.
(4) issued bearing temperature fault signal.
3.INA Bearing temperature phenomenon
When the the INA bearing temperature rises, the first action must first determine whether the error, if indeed the higher the temperature, the treatment should immediately do the following:
(1) Check the cooling water pressure, flow, and piping systems are normal. The flow down the filter may be blocked, unable to deal with, it can be confirmed that work to stop the process, and then put into use.
(2) should check governor oil pressure, oil pressure may result if the cooling water, hydraulic valve is closed.
(3) whether the sound check bearings and bearing swing abnormal test whether differences.
(4) to take the color of the oil sample observation oil changes, and test to see whether the deterioration. If confirmed deterioration should be replaced with new oil shutdown.
(5) Check the oil standard oil level is normal, if not normal, check the water tank drain valve sealing. If you turn off, the oil should be added that the treatment should be stopped if the gasket permeability.



Other News:
INA Bearing temperature processing
Common causes of heating in the bearings
Bearing noise impacts and solutions
NSK Bearings How effective installation
How to ensure the rigorous calibration method for bearing installation
FAG Bearings burnt out inspection and preventive measures
SKF Bearings Introduction and Notes
Analysis on the lubrication of the bearing in operation maintenance testing