1, choose clean, dry place SKF bearing, and maintain the necessary tools and workbench clean
  2 Do not open before bearing mounting bearing packaging
  3, the SKF bearing prior to installation, acceptance, or for any other reason without packaging, these approaches can be taken:
  a If the bearing will be in a relatively short period of time is mounted, the layer on its outer surface coated with anti-rust oil, and placed in a clean container.
  b If the bearings are not installed in the short term, on its outer surface coated with a layer of anti-rust oil and re-packaged in the original container.
  Check the lubricant barrels, boxes, tubes or injectors are clean and / or closed, the test to confirm that the bearing block is clean and no cracks, no trace, burrs or any other defects.
  5, greased, you might feel with new SKF bearing grease was not cleaned, bearing small or as high-speed operation, whether he refers lubricated with oil or lubrication, use the kerosene cleaning bearings or warm light oil to remove the anti-rust. SKF bearings with seals or dust cover, however, must not be allowed to carry out cleaning and heating.


Other News:
SKF bearings installed protective measures
Role of bearing standard installation for noise reduction
FAG Bearings important performance for high-speed operation
Pillow block bearing grease modification method of testing
NSK bearings installed correctly can improve his accuracy
Rolling bearing noise from road maintenance
The TIMKEN bearing multiple vibration solve way
Effect of vibration and noise on bearing service life