Bearing life impact is very large. The installation is one of the key stage in the bearing life cycle. Failure to use the correct methods and tools to install the bearing, the bearing life will be shortened. Initial lubrication is also the important steps of the installer. Grease suitable for bearing applications is the key to get the machine running at optimal performance. In addition, the amount of grease and lubricating also affect bearing life.
About 16% of all premature failure of the bearing due to improperly installed or not using the correct installation techniques caused. To correct and effective bearing installation, different applications may require the use of mechanical, hydraulic or a method of heating. Choose to apply to your specific application installation method assembled bearings, will help to prolong the service life of the bearings to reduce costs due to premature bearing failure, as well as the resulting damage.
Pre-lubricated sealed bearings do not need to add lubrication during installation. However, in all applications that use open bearings, these bearings must be lubricated after installation. Choose the right bearing grease for your application is a critical step maximize bearing service life. 11 in three different grades of bearing grease specially developed, applicable to the vast majority of bearing applications.


Other News:
Installation and initial lubrication of the bearing
Bearing fever detection technology
Select axial fastening
Bearing Removal of the three methods
Bearings installed after running check
Bearing precautions in the heating
The bearing preload degree adjustment
Bearing detection technology parsing