1, clean the bearing surfaces when, after all, should we use clean gasoline, kerosene, cleaning solution, such as, confirmation after cleaning dry with a clean cloth and then coated with a thin layer of lubricant, and then you can install it according to the installation process.
2, all checking ready reserve when opening the packaging of bearings, bearing should be placed in the cleaning liquids, such as gasoline and then gently with your hands outside of a full range of rolling bearings, so that the clear surface and debris inside the ball raceways.
3, even if the bearings need to be cleaned a lot of time, must be the temperature 90~100℃ thermal oil for the oil seal for hot melt away, and then emptied the old oil with clean tool and then shower hot and then heat oil flush extra oil, hot drenched with gasoline last step once more. After clean should wear gloves bearing the work surface of thin films or paper to dry on a clean cloth.
4, note with sealed shaft is never cleaned, should remain the same, generally seals rarely need cleaning, just outside under the special cleaner can.



Other News:
Bearing cleaning processes
The largest production base of bearing cages
Using experience method checks the TIMKEN bearing
SKF bearing temperature rise should be how to solve
Cast housing industry will enter the ranks of the great powers of the world
TIMKEN bearing selection summary
Effect on service life of NSK bearing what personal factors
Signs of bearing loads of daily maintenance system