SKF bearing high temperature in turning on the machine will have a greater hazard, therefore try to control temperature in the environment below 100 degrees, these special operating conditions is that as you scroll through the surface (track and rolling) were effectively separated by a lubricant film and limit pollutants may cause surface damage. In fact, in ideal conditions, the so-called permanent bearing life is possible.
Cause of SKF bearings overheating may be:
1. insufficient oil or mixed with impurities
2. the bearing is not installed properly
3. friction bearing load is too large or larger, incorrect gap adjustment
4. bearing vibration in turning process too large bearings technology does not meet the requirements
SKF bearings are precision components, its use has to be appropriately cautious. No matter how high the SKF bearing, if used incorrectly, you will not get the expected performance. The bearing of precautions for use are as follows.
1, maintaining a clean bearing and its surroundings
Even invisible micro-dust into the bearings, also increases bearing wear, vibration and noise. SKF bearings and its surrounding accessories should be kept clean, in particular, dust and dirt, tools and working environment must also be kept clean.
2, the use of installation should carefully
Powerful punching is not allowed, not allowed with a hammer directly strike the SKF bearing, passes through the rolling pressure is not allowed.
3, the use of appropriate and accurate installation tools
Using special tools as much as possible, avoid using things like fabric and fiber.
4, preventing corrosion of bearings
When hands get SKF bearing directly, to fully wash away sweat on his hand, and coated with high quality mineral oil before operation, paying particular attention to rust in the rainy season and summer. However, in some special operating conditions, SKF bearings can be obtained more than traditional computing life, especially under light load conditions.



Other News:
For SKF bearings are used which require
TIMKEN high temperature bearing damage degree of judgment and appropriate technology
NSK bearings, load ratings
The damage of TIMKEN spherical roller bearing
The main factors leading to failure of TIMKEN overall vibration of eccentric bearings
Why needle roller bearings were mixed
Main rolling bearing failure mode
Motor failure analysis and treatment of bearing