1. when washing a large amount of rolling bearings, first with temperatures of hot melt 90~100℃ hot oil to seal off, and then use the clean tool to empty the old engine oil and then pour hot for a while and then rinse with hot oil inside the extra oil, final step for hot-gas spraying again.
2. clean surface of rolling bearing, should choose cleaner, such as gasoline, kerosene, cleaning solutions, confirmed after cleaning wipe dry with a clean cloth and then coated with a thin layer of lubricant, then follow the standard installation process can be.
3. all checks when ready to open a package of rolling bearings, bearings should be put in the cleaning liquids, such as gasoline and gently turn by hand outside bearings complete set, clearly then, the roof surface and ball roller inside the debris.



Other News:
Rolling bearing normal cleaning process
Tapered roller bearing quenching medium and the choice of cooling agent requirements
Four factors operating failure of spherical roller bearing
Damage detection of bearing technology
Effect of needle roller bearings installed on the performance and service life
Needle is not properly lubricated the burn problem
Ten points of measurement of rolling bearing
For needle roller bearings and shaft combined with detection