1, new and used pumps, generally running must be replaced after 100 hours grease (oil), after every 500 hours of running 1.
2, Movement using grease lubrication SKF bearing, run after 1500 hours, grease should be replaced, raise should not be too much oil or too little because too much or too little grease will cause heating in the bearings, fuel generally lies in the 1/2~2/3 of bearing Chamber volume is appropriate.
3, for SKF bearings are lubricated by lubricating oil, oil should be added to the provision.
4, Sung to clean oil or grease container, usually be sealed well, there should be no dust, iron filings and other debris, so as not to damage the bearing.
5 generally use sodium grease, motor bearings, features of this grease is resistant against high temperature 125 ° c), but easily dissolved in water, so it cannot be used to pump SKF bearing lubrication.



Other News:
Maintenance of pumps of SKF bearings
Ways to prevent burning of SKF bearing in diesel engine
Rolling sound check malfunction of bearings
Mud pump crankshaft connecting rod bearing design and installation
Auto bearing for use and maintenance instructions
FAG rolling bearings according to type of structure classification
The rolling bearing sound can determine the fault
Flange bearing maintenance of key technologies