Know bearings are precision parts, when in use requires a fairly cautious attitude that change is the use of high-performance, SKF bearings, if used improperly, they can not achieve the expected performance results, and easy to bearing damage. Most of the bearing pumping bad for many reasons - beyond the original estimate of the load, non-effective sealing, due to the tight fit of the bearing clearance is too small so. Any one of these factors are factors that damage type has its unique and special damage will leave traces.
    Therefore, viewing the damaged bearings can be found in most cases its possible cause, generally speaking, a third of NSK bearings damage due to fatigue damage, arising out of the other one-third of poor lubrication, Other third contaminants into the bearing arising out of improper handling or installation.
    So, we want to say is how to protect it and prolong its life, who do not want to let the bearing wear, durable it, unless your nerve problems (Oh), the use of FAG Bearings should note the following:
    A, to keep their surroundings clean bearings
I do not know how else to say it, even if invisible dust from entering the bearing, but also make bearing wear that white, his eyes not the slightest rubbing sand, is a reason!
    B, using the installation should carefully accurate installation
We will not even such a little common sense would not it, if not, then do not do the bearings, and go home to play, the most important thing is to not allow a strong punch, does not allow a direct hit with a hammer bearing, not afraid to drop bad, you give smashing deformed, how to do, to bear the loss, ha ha, there is not allowed to pass through the rolling pressure.
    C, using the appropriate and accurate installation tool
Make use of special tools, try to avoid using fabric and staple fibers and the like.
    D, to prevent corrosion of bearings, do not use blister
Bearings are made of stainless steel, but also afraid of the water, if you do not believe, you put water clubbing, Oh, hand pick TIMKEN bearings, to fully wash hands sweat, and coated with high-quality mineral oil before you start operations, during the rainy season and summer with particular attention to rust, do not be afraid to tell me what to say rusty, well, you try it myself and see what the result would be rusty!
Bearing life is a certain number of years, if we can really use, the normal use of attention at the 4:00 matters, INA bearingswill fully play its role!



Other News:
Effect of bearing lubrication and lubrication on the importance of introducing
Bearing damage and precautions 4 points
Small Rolling causes and prevention of corrosion
The basic structure of the bearing
TIMKEN bearing surface fatigue failure repair and maintenance
Select the method of roller bearings
The importance of bearing the higher the greater the need for careful examination
Introduction bearing clearance for operation of the law