US-based Electro Static Technology (EST) has collaborated with Fluke to produce a kit that tests whether an inverter-driven motor is affected by stray shaft voltages that could damage its bearings.

VSD-induced voltages can build up on a motor shaft and then discharge in short bursts along the path of least resistance – often the bearings. The discharge rate tends to increase with the VSD carrier frequency.

Continued discharges can pit the bearing balls and race walls through electrical discharge machining. This pitting can cause washboard-like ridges called fluting along the race walls, resulting in vibration and noise. By the time such damage can be heard, bearing failure is often imminent.

The new kit (above) combines a Fluke Scopemeter portable oscilloscope with a probe containing high-density conductive microfibres that ensure continuous contact with a rotating motor shaft. The probe can be held by in place by hand, or used with an optional magnetic base. The oscilloscope displays the voltage waveform and saves the image for analysis. The kit is said to make it easy to measure and document the damaging VFD-induced voltages before the bearings are damaged.

EST also produces products that extend motor lives by diverting the shaft currents safely to ground. The maintenance-free Aegis bearing protection rings can incorporated in a motor when it is built, or added later.

Other News:
Electro Static Technology introduced Kit that detects motor shaft voltages before they can damage bearings
Meeting of ZKL authorized distributors
New Way® Air Bearings to Present Papers at Both AIMCAL Europe Conferences
NSK TECHNICAL HANDBOOK “Ball Bearing Units” HELPS USERS SELECT THE HIGHEST PERFORMING BEARINGS FOR THEIR APPLICATION
ZKL fights with falsification of its bearings which get into the market in the Czech Republic (pic)
Triangle Manufacturing's Cushioned HVAC Bearings Now Available in Multiple Strengths Without Increase in Weight
Schaeffler Brasil awarded by Moto Honda fourth year in a row (pic)
NTN Exhibits at the European Mechatronics Meeting (EMM) 2012