The method commonly used to adjust the radial FAG bearing clearance is as follows:
 
1, cylindrical and elliptical bearing backlash, bearing heat treatment technology can be used to repair scratch method to adjust manually scrape or bearing carved face padded turning.
 
, Cylindrical and elliptical bearing headspace can be manually scraped or circumstances allow the bearing carved face padded adjusted.
 
3, multi-oil wedge fixed bearing, in principle, allow the repair scratch and adjust the bearing clearance; clearance inappropriate should be replaced with new tile.
 
The tilting bearing oil wedge does not allow repair scratch pad, Analysis of: bearing failure inspection and the reasons for failure gap should be replaced due to the tile inappropriate. Adjustable tile thickness by adjusting the amount of watts adjustment block under the back of the tile and stainless steel pad, or thinning the thickness of the adjustment block. Attention to the multi-oil wedge tilting bearing the same group tile thickness error should be less than 0.01mm.



Other News:
Adjust the clearance of FAG radial bearing
The effect of heat treatment technology
The application of SKF heavy-load bearings
Committee nears final vote on immigration bill
United in deal with SkyWest to run 40 Embraer jets
Some notes for using bearings
IMF boss Strauss-Kahn attends South Sudan bank opening
Petraeus email objected to Benghazi talking points