KOYO bearing disassembly should pay attention to:
Assembly site should be kept clean, no dust.
To avoid KOYO bearing dust, contaminants and moisture - pollutants have an adverse impact on the operation and service life of the KOYO bearings.
Check the mating surfaces of the bearing bore and shaft: geometric and dimensional accuracy and cleanliness.
Painted with a little oil or a little grease to the mating surfaces of the bearing rings.
5 Make sure the shaft and the bearing hole with a 10 degrees -15 degrees boot chamfer.
Do not over-cooled bearings: condensing moisture can lead to the mating surfaces of the bearing and corrosion.
After installation: to bearings filled with lubricant, check whether the bearing arrangement is operating normally.
Removing the Guide:
KOYO bearings installed parts of the original design should take into account the demolition - If the bearing selection interference fit, the shaft or the bearing hole should be set demolition ferrule with a groove to facilitate removal. Dismantled bearings also reuse:
1. Should avoid directly against bearing rings,
Dismounting force should not be passed through the body to
KOYO bearing dismantled should be carefully cleaned and can not be used "violent" flame.



Other News:
Syrian opposition calls on Hezbollah to stay out
Attentions should be paid during KOYO bearing disassembly
China rushes relief after Sichuan quake kills 180
Halliburton seeking settlement over Gulf oil spill
Nuclear North Korea entreats Mongolia for help in feeding its people
Germany the Presidential found with explosives letters
Crossing Obama's ＂red line＂ on Syria will require concrete proof
Apple to dole out $100B to shareholders