1, the choice of Bearing: Bearing general FAG import bearing selection by the user of the technical staff in accordance with the conditions of use of complementary products and to withstand load. Business people to understand the user's actual load is not consistent with the selected bearing if the bearing to reach the requirements, as soon as possible to advise clients to re-election model, but unless special products in the choice of models generally do not have any problems.
2, the bearing clearance choice: buy bearings usually only informed in what type, grade, will have very little bearing clearance request, the business must ask clear bearing conditions of use, the speed of the bearing temperature with the tolerances are directly related to the choice of FAG import bearing clearance. Generally at 3500 rev / min below the speed of the motor mostly CM clearance, such as high temperature and high-speed motor requires a relatively large clearance.
Bearing clearance in the assembly because the narrowing of the hole up and cylindrical lead to a reduction in clearance to reduce the amount of interference amount × 60% = (bearing chamber except aluminum). Such as bearing assembly clearance is 0.01mm, and the amount of interference in the assembly of 0.01mm, the clearance after the bearing assembly is 0.004mm. In theoretically bearings in zero clearance, noise and life to achieve the best state, but in actual operation taking into account the temperature rise and other issues bearing clearance after assembly 0.002mm-0.004mm better.
3, the choice of oils and fats: the choice of oils and fats are generally bearing speed, temperature, noise requirements and starting torque to choose the business people know much about the performance of the various oils.
4, the choice of bearing seal type: FAG import bearing lubrication can be divided into the oil lubrication and grease lubrication. The oil lubricated bearings generally is an optional form of bearings, grease lubricated bearings generally used in the dust cover or rubber seals seal. Applicable to the good parts of high or use dust cover, seal the sub-contact seal and non-contact seal two contact seal dustproof performance is good but the starting torque, non-sealed starter torque is small, but the sealing performance no-contact.
Other News:
How to choose the FAG bearings and fit requirements
Hebei Iron and Steel part of the raised ex-factory price of steel hope for wind
Jinzhengen married his wife exposed the Korean intentions
High-speed angular contact ball bearing installation method
Steel trading business, self-reflection
Iron ore to low volumes and large-scale mine down prices
London Olympic schedule announce the opening ceremony of the time determine
Steel are adapting to the pace of economic slowdown
