Cars and mechanical NTN Bearing an important difference is that the car NTN bearings used in the mobile environment, so its force status and working conditions are more complex, while the car to catch as a very sophisticated mechanical parts, the correct installation andthe use of lubrication and maintenance is essential for the catch into the basic functions of.
   
NTN Bearing installation and removal
   
NTN bearings with clean kerosene or gasoline and matching components in clean water;
   
Check ready to use NTN Bearing is consistent with the original model, matched by the part size is qualified;
   
NTN bearings with a special assembly tool sleeve pressed into the tool sleeve diameter must not exceed the outer diameter of the NTN Bearing rib assembly, forced to be uniform, do not shock and brutal assembly;
   
NTN Bearing installed should turn the NTN bearings and related components, to see whether card hysteresis phenomenon and abnormal noise;
   
Requested by the host components into the specified grease or lubricating oil;
   
Large amount of interference products in the assembly of large NTN Bearing NTN Bearing and shaft bore NTN Bearing oil bath heating, the oil temperature at 80 degrees Celsius;
   
NTN Bearing disassembly must use a dedicated tool for drawing class, beat NTN Bearing iron directly is strictly prohibited;
   
NTN Bearing assembly and disassembly, should be avoided so that the rolling element, to maintain the aircraft by force or deformation.



Other News:
Automotive NTN Bearing installation, use and maintenance of common sense
NSK Bearings vibration factors
What are the hot and cold shock chamber installation risks
TIMKEN bearing failure on the transmission
PLA high-level: the East China Sea Sword will never let the taxpayers down
Hu Jintao next command: change in the top echelon of the Chengdu Military Region
Huangyan Island News: Fei Nanhai confrontation cited war speculation
South China Sea, three Warsaw: air force frequently linked to bomb drill