Axial angular contact ball bearings In addition to the excellent quality, but also a very sophisticated parts, both high-performance import IKO bearings, if used improperly in the course of not only fail to achieve the performance and very easy to make the bearing damage, lubrication, I am sure you have attention.

Bearing a scroll, the inner ring and outer ring raceway surface, and move the body is immobile contact, so the trajectory for the dark side, running track attached to the surface of the raceway is not abnormal, this change can be learned loads premise. remove the bearing case, please strictly follow and observe the trajectory of the raceway. If careful observation of the trajectory, then, is learned only required to bear the radial load to bear large axial load, under torque load, or extreme rigidity uneven on the bearing housing.

Can check the bearing is coupled with an unexpected load and installation errors such as whether the country, and clues to be investigated for reasons bearing damage.

If there is no wrong choice and be able to accurately use, Axial angular contact ball bearing life before, but with a very long period of time, in this case, the damage state for the stripping. On the other hand, there are unexpected port early injury, unable to withstand the use of early damage, as the cause of this early damage, there is enough to consider the use and lubrication, and thus there is foreign invasion, IKO bearing assembly error and import large deflection, shaft and bearing box is not enough.

It can be said that these reasons overlap each other more. Therefore, to fully understand the bearings of the machine, using the premise on the basis of bearing structure of the periphery, if we can clarify the situation before and after the accident, combined with deep groove ball bearing damage and a variety of reasons to inspect, you can to prevent similar incidents from happening again.

Bearing failure phenomena in general, two types of the First Axial angular contact ball bearing installation site temperature is too high, bearing running noise.

First, using the installation to be carefully
Does not allow a strong punch, does not allow direct percussion with a hammer bearings, not allowed to transmit pressure through the rolling.

Second, the use of appropriate, accurate installation tool
Try to use a special tool, try to avoid using the cloth and staple fiber and the like.

Third, try to keep the bearing and its surroundings clean
Even if invisible to the naked eye smile dust from entering the bearing will increase bearing wear, vibration and noise.

Fourth, to prevent corrosion of bearings
Hand to pick up bearing, necessary to fully wash away the sweat of the hands, and coated with high quality mineral oil and then operate, with particular attention to anti-rust in the rainy season and summer.

A particular operating conditions, the thrust angular contact ball bearings can get a longer life in the traditional computing, especially in the case of light load. These special operating conditions, when the rolling surface (track and rolling) to be an effective lubricant film separated and limit pollutants may cause surface damage. In fact, under ideal conditions, the so-called permanent import IKO bearings life is possible.



Other News:
Analysis of import the IKO thrust angular contact ball bearings running over to
13 days across eight countries, including Europe, Asia and Africa Hillary around
Chinese fishery boat hit back at Japan warned the Japanese ship left the territo
Ueno Zoo in Tokyo on the giant panda baby death
Demand downturn the futures Powei hot-rolled spot stumble endlessly
Philippine Foreign Minister angry accused China of ＂increasingly aggressive＂
The IMF said Italy is facing the risk of proliferation of European debt crisis
Around the Secret: China to quell the chaos only to recover the Diaoyu Islands?