Contact us

Company Name:
Lishui Huanqiu Bearing Trading Co., Ltd.

Company Address:
No.11 Shiting Road, Shuige Industrial Zone,Lishui, Zhejiang,China
Contact Person: William

Email: admin@tradebearings.com
Homepage: www.asiabearings.com
Bearing B2B: www.tradebearings.com

email

 

Home > News >

FAG bearing the main methods of Cleanliness Test

Quality Act
   
Transferred to the cleaning fluid cleaning bearing impurities, and then the cleaning liquid through the filter, drying, weighing, calculating the average of each set of bearings attached to the particles of impurities on the membrane quality. This is more important, impurities as possible, preferably the impurities are clean, this is the best. The use of FAG Bearings is also good.
   
Microscope counting method
   
Transferred to the cleaning fluid by cleaning the impurities within the FAG bearing, and then the cleaning liquid membrane filtration and microscopy observations membrane called to the size and number of impurity particles.
   
Automatic particle counting method
   
 Direct determination of particle number and size of magazine based on the photoelectric principle. FAG Bearings impurities by cleaning transferred to the cleaning fluid, and then cleaning fluid through the direct determination of particle counters. This method uses a lot of mechanical engineers, before using this method also shows that this method is preferable.
   
Cleanliness FAG import bearing performance impact:
 
1) the impact of cleanliness on the bearing life: bearing the cleanliness of the bearing life is very high lubricant cleanliness, can effectively improve the bearing life.
 
2) Cleanliness of bearing vibration: cleanliness seriously affect bearing vibration levels, high cleanliness of the bearings, the low value of the vibration, in particular the impact of the high frequency band is particularly significant.
 
3) the impact of the cleanliness of the bearing lubrication performance: bearing cleanliness to reduce not only affect the formation of lubricant film, may also cause the lubricant deterioration and accelerated aging, which affects the lubrication performance.



Other News:
FAG bearing the main methods of Cleanliness Test
Five mainland steel prices into the latest ranking of the WSD competitiveness
Philippine presidential spokesman in Chinese warning China "careful"
Spain will launch additional deficit reduction measures
INA rolling mill bearing life of reason analysis
The Bank of England is deep manipulation of interest rates scandal
Euro zone PMI final value in June rose to 46.4 better than expected
Bearing roller process