A lot of maintenance of INA bearings are the same, but different for each industry, its not the same maintenance. I just introduce under maintenance of INA bearings in the pump.

(1) put into use, the general to be replaced after 100 hours of running grease (oil), after each run 500 hours to replace.

(2) the flow of grease lubrication INA bearings, run for 1500 hours, should be to replace grease, filling the oil is not too much or too little, because the grease too much or too little will cause the INA bearing heating, refueling generally lies in the 1/2 to 2/3 of the INA Bearing chamber volume is appropriate.

(3) INA Bearing with lubricating oil, the oil should be added to the specified location.

(4) Sheng lubricating oil or grease to be a clean container, usually sealed, there should be no dust, iron filings and other debris, so as not to damage the INA bearings.

(5) The motor INA bearings generally use sodium based grease, the characteristics of this grease is to high temperature (125 ° C), but easily dissolved in water, so it used to pump the INA Bearing lubrication.



Other News:
INA Bearing maintenance on the pump
Bearing parts riveting examples
NTN Bearing steel smelting quality of the basic requirements
Beryllium copper heat treatment should be noted that some of the issues
High-speed spindle bearings of CNC metal cutting machine tools
Stainless steel forging rough heating process
Salt spray test, you do not know
Bearing mathematical treatment of sets of parts diagram