The sliding bearing arrangement includes not only IKO bearings, but also with bearing parts, such as shaft and bearing. The lubricant is also bearing configuration is a very important part of the lubricant to prevent wear anti-corrosion, so that the bearing in order to fully play its role. In addition, the seals is a very important part, the sealing performance of the lubricant clean is essential. Kept clean and have a profound impact on the life of the bearing, which is why lubricants and seals has become part of the SKF bearing service reason.

(1) bearing a share of the machinery space and location

(2) bearing load suffered by size, direction and nature of

(3) bearing aligning performance

(4) bearing rigid

The information is usually included in the comprehensive chapter applies to ordinary IKO bearings, or at least apply to a set of bearings. If you only need the exact information of a certain plain bearings, can be found in the text before the corresponding section of the classification table.

IKO bearings installed on the careful alignment, the alignment may cause the bearings subjected to the additional load, friction and vibration. These may accelerate fatigue and reduce the service life of bearings, and the period of use of other machine parts may be damaged. In addition, the increased vibration and friction may be greatly increased energy consumption and the risk of premature failure.

(1) Note that with sealing sliding bearings cleaning unavailable this Law, the internal seal should be intact to non-cleaning.
Bumps, burrs, rust, or solid particles (such as debris, sand, soil)
 
(2) axis and the bearing hole assembly on the surface, if exist, will not only plain bearings difficult to install and the installation location is incorrect, and solid particles such as fall into the bearing will play a grinding role, when the rotation of IKO bearings will wear the bearing surface of injuries or abrasions, and so must be carefully checked prior to installation, such as the above defects, should be amended. Such as oil file to remove burrs, raised touch marks, rust, and with fine emery cloth, polish, and if the cleaning of solid particles, dirt, etc.
 
(3) Pro installation, open the bearing package, it would be immersed in the above gasoline and other liquid hand gently rotating, to ensure that the cage, the IKO, the raceway surface of the encapsulated oil thoroughly washed clean.



Other News:
Precautions before application of the principles and how to choose IKO slide bea
IKO thin wall bearing the selected steps
Lathe FAG non-standard bearing installation need to prepare
Industrial livelihood of the people to save the steel trade association wrote to
Analysis of the impact of TIMKEN bearing material of their life
TINKEN miniature bearing lubrication knowledge
The Japanese government is tolerating the Diaoyu Islands events to expand
FAG import bearing heat treatment technology and equipment