Mechanical polishing is mainly done manually, so polishing technology is still the main influence polishing quality. In addition, the mold material, surface conditions prior to polishing and heat treatment process. High-quality steel is a prerequisite to get a good polishing quality, uneven or characteristics of the steel surface hardness differences tend to produce polished difficult. Steel in a variety of inclusions and pores are not conducive to polishing.
Affect the hardness of the polishing process, the different hardness increased so that the grinding difficulties increased, but the polished roughness decreases. Due to increased hardness, lower roughness required to achieve a corresponding increase of polishing time. Hardness increased, excessive polishing of the possibility of a corresponding reduction.
Steel workpiece surface conditions the polishing process in the crushing process of cutting machining, surface due to heat, internal stress, or other factors damage, improper cutting parameters will affect the polishing results. EDM surface than the surface more difficult in the ordinary machining or heat treatment after grinding, EDM refined criteria should be adopted before the end of EDM dressing, or hardening thin layer formed on the surface. If the spark refinement criteria inappropriate choice of the heat-affected layer depth of up to 0.4mm. Hardening thin layer of hardness than the hardness of the matrix must be removed. Therefore better to increase the processing of a coarse grinding to completely remove the damaged surface layer, to form an average rough metal surface to provide a good basis for polishing.
Chemical polishing for the polishing requirements of the degree is not high occasions, need to be heated to use, the present technology, is able to use the above three kinds of polishing do not use chemical polishing, chemical polishing effect, higher overall costs.
Other News:
Factors affecting the stainless steel mold polishing quality
Mill hollow shaft and rolling bearing assembly
The Greek people worry out of the euro cash withdrawal Chu food
Stamping processing of raw materials to select the characteristics of
Automobile Bearing Universal lithium grease
Iraqi Oil Minister said that Iran did not substantially reduce crude oil product
The ball several tempering method and time control techniques
Crack the steel industry chain of funding crisis need to be self-reflection from
