INA bearing grease can be roughly divided into two categories, lithium and calcium. Vibration control system can help solve the problem. This system based on LM guide the ball screw application technology, in the earthquake of people's lives and life for protection. This system not only can prevent the damage in the earthquake, lithium and relative and calcium base oil has excellent water resistance, mechanical stability, chemical stability of lithium soap thick ability is strong, adding in grease extreme pressure agent, antirust additive, made into a variety of long life fat. Still can because his ubiquitous, reliable and durable and reduce fears, brick machine bearings use bad environment, time is long, and the load heavy and maintenance hard, so with the lithium base oil mostly number.
If there were INA bearing the iron filings, burr, dust and foreign body in, will make the gimbal bearings in operation noise and vibration, and even will damage the groove and rolling body. So in the installation of bearing before, must ensure that the mounting surface and installation environment clean.
INA bearing operation for lubrication and life has an important influence. By base oil, grease thickening agent and additive is made. The performance of the grease mainly by base oil decision. General low viscosity base oil is suitable for low temperature, high speed; High viscosity suitable for high temperature, high load.
Thickener also relates to the lubrication performance, thickener water resistance decided to grease water resistance. In principle, the sign of the different grease can not be mixed with, and even the same thickener grease of, because different additive has a bad influence on each other. Gimbal bearings is coated with temporary, must use clean gasoline or kerosene careful cleaning, besmear again clean quality or high speed high temperature to lubricate the grease can install and use. Fully enclosed bearing need not cleaning refueling.
INA bearing in installing after, if not careful the accurate, straightening may lead to suffer another load bearing, friction and vibration. These may accelerate fatigue and reduce the service life of the bearings, and could damage other machine parts use period. In addition, the vibration and friction might increase greatly increase the energy consumption and premature failure risk.
In use period, usually to universal joint bearing the basic operation external condition monitoring, such as temperature, vibration and noise measurement, etc. These regular inspection will early detection of potential problems and will prevent unexpected machine to suspend the phenomenon, make the production plan can be realized, improve productivity and efficiency of the factory.
In the process of operation, the INA bearing with the correct lubrication request again, perfect its performance. Bearing the lubrication method, divided into grease lubrication and oil lubrication. In order to make the bearing good use function, first of all, want to choose to suit the using conditions, use the purpose of lubrication method. If only consider lubrication, oil lubrication lubricity dominant. But grease lubrication can simplify the gyroscope gimbal bearings are the specialty of surrounding structures.
Other News:
The use of the lubricating oil INA gyroscope gimbal bearings and the performance
TIMKEN bearing parts heat treatment effect
Bearing grinding processing knowledge: the secret of successful dressing grindin
INA deep groove ball bearing limit rotational speed maintenance steps
SKF bearing the order of finishing steps
The rolling bearing manufacturing-collar is forming
Commonly used INA self-aligning ball check way bearing lubrication
INA railway bearing some faults affect the maintenance of the improvement measur
