the data indicate that the main reason caused by mechanical failure or early wear and tear, more than half of the management of lubrication technology. Do a good job in lubrication management, scratches or sintering to prevent the friction of bearings, gears and other moving parts to prevent and reduce wear and reduce friction, prevent equipment accidents, and improve the efficiency of equipment; energy conservation, improve the effective utilization of energy, increase economic benefits are the main tasks of lubrication management.

A lubrication management is a professional technical and management should be set up full-time lubrication technology management, the development of lubrication management system, knowledge of lubrication technology training.

Tank capacity under the premise to keep the tank oil level, and often fill the lubricating oil to the fuel tank, the fuel tank of oil is always in a reasonable run the oil level, oil degassing, precipitation machine hybrid, the separation of water and reduce box oil temperature is beneficial to both.

Timing, positioning extract run Chinese Petroleum kind of laboratory testing from the smell of oil, chrome, changes in viscosity, water content, water separation properties, pollutant categories and content, anti-foam properties. Oil into the lubrication point more than 0.1% moisture content, mechanical wear is dramatically increased; more than 0.5 percent of the lubrication conditions will be very dangerous. Make detection records.

The analysis and comparison of each test record, forecast to develop improved or hedge to poor lubrication state. System oil level, oil, oil temperature, oil pressure control alarm and 

Other News:
The film bearing oil lubrication management
Method for the bearing replacement
Bearing sealing
The role of the metal cutting fluid
Pre-load of rolling bearing
Oil seal install skills
The typical hydrodynamic bearings note
The way of bearing anti-rust