In order to maintain the bearings have been the performance in good condition as long as possible, to be the maintenance, overhaul, in order to accident prevention in the first place, to ensure the reliability of operation, improve productivity and economy.

Maintenance best corresponding mechanical operating conditions, operating standards, on a regular basis. The surveillance operation, to supplement or replace the lubricant, the inspection of the regular demolition.

As maintenance issues in the operation, the bearing of the rotating sound, vibration, temperature, lubricant status and so on.
Bearing Maintenance
Bearings cleaning: remove the bearing maintenance, first recorded the appearance of the bearing, to confirm the amount of lubricant remaining after sampling to check with the lubricant, wash bearings. As a cleaning agent, ordinary as gasoline, kerosene.

Remove the cleaning of the bearing to the points of rough cleaning and fine cleaning, respectively, on the container, first put the bottom of the metal net, bearing no direct contact with the dirt of the container. Coarse cleaning, if the bearing rotation with dirt, will damage the bearing rolling surface, it should be noted. Coarse cleaning oil, use a brush to remove to grease, adhesive material, and generally clean, and transferred to the sperm washing.

Sperm washing is the bearing side of the 

Other News:
Bearing maintenance
F & F bearing installation knowledge
Maintenance and monitoring of rolling mill bearings
Growth rate of the compressor heat treatment of gears
Worm concept, classification and application
The diagnosis of bearing
Measurement of?the radial bearing clearance?Note
Radial bearings and thrust bearings