1 lubricant role: in addition to protecting the gear tooth surface to prevent friction and wear and tear and lubricate the bearings.

2 oil should have the characteristics:

An appropriate viscosity at operating temperature so that it applies to both gears and bearings.

3 have strong load capacity and wear resistance, extreme pressure properties.

4 have anti-rust, anti-foam, anti-oxidation properties. 4 stable in storage is not easy to isolate or deterioration.

5 lubricants used points to pay attention:

A new oil loading gear after the first oil change or within two weeks required after the oil filter to use.

6 loop knots in the lubricant oil system and values as compared with the new oil has increased0.8-1.00, and possessed significantly higher viscosity need to be replaced immediately.

7 gearbox temperature higher than room temperature 27 ~ 38 ℃, but can not exceed 93 ℃,while the 71 ~ 82 ℃ normal.



Other News:
Automatic alignment
The choice of gear lubricants
Bearing mechanical seal installation and use requirement
The engine longevity method
Industrial FAG bearing damage and judgment
The results of the classification bearing performance characteristics
Deep groove ball bearings application and maintenance
The usual way to indentify the bearings quality