The installation of the bearing is correct, affecting precision, long life and performance. Therefore, design and assembly department for the installation of the bearing should fully research. Hope according to the standard installation work. The project operation standard usually are as follows:

(1), cleaning bearing and bearing parts relation;

(2), check the link the size of the parts and precision processing situation;

(3), installation;

(4), the installation of check ;

(5), supply lubricant.

Hope that in the coming before installation, have opened the bearing packaging. General grease lubrication, not to clean, direct filling grease. Lubricating oil, also need not ordinary cleaning, but, with the high speed bearings or instrument with to wash with clean oil, remove the rust on besmear in bearing. Remove rust bearing, easy to rust, so cannot place no attention. Moreover, already sealing grease into the bearings, no clean directly use.

TIMKEN bearing installation method, for bearing structure, cooperate, conditions different, generally, it is because for axis rotation, so inner circle over surplus to cooperate. Cylindrical holes bearing, multi-purpose pressed into the press, or use hot charging method. Cone hole occasions, installed directly to the taper axis, or with the sleeve installation.

Installation to shell, with general clearance, outer ring had surplus quantity, usually with pressed into the press, or have after cooling method of installation with cold. With dry ice for cooling agent with the occasion of installation cold, moisture from the air will be condensed in the surface of the bearing. So need appropriate antirust measures.



Other News:
NACHI bearing installation:
NSK bearings rolling to the basic properties of the material requirements
The application of plastic in the rolling bearing
Installation and adjustment of the low-noise bearing
SKF bearing puller use introduction
Common definitions of the terms of the Rolling Bearing Dimensions
Grease to use in the repair process
Rolling bearing support system composite structural design