Product Features
Similarly, Thrust Spherical Roller Bearings Spherical Roller Bearings seat raceway is the bearing center axis point as the center of the spherical kind of bearing roller spherical type, with self-aligning feature concentricity and axial deflection is not very sensitive.
The other thrust bearing and the sample is different from the type of bearing axial load capacity is very large, while the axial load can be subject to certain radial load, radial load should not exceed 55% of the axial load.
As long as the load P and P0 not over 0.05C0 and the axial ring rotation bearings, aligning angle allows the table below.

Bearing 200 series 300 series 1 ° to 1.5 ° 1.5 ° to 2 ° 400 Series 2 ° to 3 ° angle value in the Diameter Series aligning bearing diameter series aligning angle applies to larger bearings allows the load increases aligning angle will be reduced.
General use of oil lubrication. This kind of bearing is mainly used in the hydroelectric power generators, vertical motors, ship propeller shaft, crane, and extruders. Products
Symmetrical thrust-aligning roller bearings
Asymmetric thrust-aligning roller bearings size range
The basic dimensions of ZWZ thrust-aligning roller bearings are set out in the dimension tables,
Diameter size range: 60mm ~ 1120mm
Diameter size range: 130mm ~ 1460mm
A high degree of size range: 39mm ~ 354 mm
Tolerance
ZWZ provide P0, P6, P5, level tolerance products.
Cage
Cage commonly used brass entity holder and stamping frame. Brass solid cage, the cage after set code does not mark the remaining signs after code.



Other News:
The basic properties of the thrust-aligning roller
Note of using TIMKEN deep groove ball bearings
Electrical insulation bearing the classification and size range
Rolling bearing lubrication should follow the principle
Characteristics and classification of the deep groove ball bearings
Conventional martensite quenching and organization and performance
FAG double row angular contact ball bearings basic type
KOYO bearings in vibration Fracture