The thrust needle roller and cage component is the main component of the thrust needle roller bearings, cage surface shape of the M-shaped, with good stiffness and wear resistance and has a large oil storage space, so that the bearing can get a good lubrication.
Grouping tolerance of high-precision needle diameter is 2mm to ensure that the load is evenly distributed. The thrust needle roller and cage assemblies, axial guidance, so, even at high-speed; the guide surface is still at relatively low circumferential speeds. The bearing surface of the part design bearing raceways to dispense with the washer, be eligible for special space-saving, such as the use of the AS series washers also have access to a very small axial section height. With thicker GS, WS series washer assemblies can also be used for other installation conditions. Washers must be ordered separately.
SZ-thrust needle roller bearings thrust needle roller and cage assemblies, plus washer. (Needle or cylindrical roller) by the cage to maintain and guide the selection of high-precision needle (or cylindrical roller), an increase of the contact length, making such bearing small-footprint for high load capacity and high rigidity.
TN = plastic cage to allow the operating temperature: 120 ℃ continuous, 150 ℃ temporarily, 180° C for short periods. Limit speed of the oil lubrication oil to be cooled down sufficiently greased to allow 25% of the value of the table values listed.
Able to obtain a higher value in the appropriate case cooling.



Other News:
Bearing radial load
Thrust needle roller and cage assemblies
Metal Forming Lubricant selection
Installation method
Measurement of the bearing clearance
The cylindrical bore radial bearings
The bearing cleaning
What are the advantages of self-lubricating bearings?