Bearings are precision parts, when in use requires quite a cautious attitude, that changes the use of high-performance bearings, if used improperly, they can not achieve the expected performance results, and easy to make the bearing damage. Therefore, the use of bearings should note the following:
First, to keep their surroundings clean bearings
Smile even if invisible dust into the bearing, will increase bearing wear, vibration and noise.
Second, when using the installation carefully
does not allow a strong punch, does not allow a direct hit with a hammer bearing, is not allowed to pass through the rolling pressure.
Third, the use of appropriate, accurate installation tool
Make use of special tools, try to avoid using fabric and staple fibers.
Fourth, to prevent corrosion of bearings
direct pick up the bearings by hand, to fully wash hands sweat, and coated with high-quality mineral oil before you start, during the rainy season and summer with particular attention to rust.
However, in certain special operating conditions, the bearings can get a longer life in traditional computing, especially in light load conditions. These special operating conditions are that, when the rolling surface (track and rolling pieces) is an effective lubricant film separating and limit pollutants may cause surface damage. In fact, in ideal conditions, so-called permanent bearing life is possible.



Other News:
Bearing damage
Cylindrical roller bearing uses
High rigidity bearing applications
Bearing outer ring three repair technology
Maximize the service life of bearings
Bearing greasing method and rigidity
Bearing rings of cold treatment
Forgings classification