FAG bearings and bearing components have been successfully applied to machinery, equipment and instruments. FAG bearing housings are usually gray cast iron. Because the bearings with grease lubrication, grease filled for the first time after working for a long time, so most of the bearing can be without lubrication holes, if required, can be cast on the flat or raised markers, can be drilled using grease lubrication hole to fill. Re-lubrication, leakage of excess lubricant must be erased.

FAG bearing block off
    

 FAG bearing type commonly used in off-aligning ball bearings, cylindrical roller bearings and spherical roller bearings. Bearing base and detachable via the pin on the bearing cap, so easy to install and maintain. Bearing cover is not interchangeable. FAG bearing seat off, S30K series, SD31TS series with the 230K range for tight sleeve conical bore spherical roller bearings, including bearing S30K S3040K off style, including a small swimming-type bearing housings are ; inserting a fixed ring can be fixed on the bearing. For 231K Series with adapter sleeve conical bore spherical roller bearings SD31TS series bearing this bearing for heavy load bearing, bearing with adapter sleeve fixed to the shaft.
    

 FAG bearing flange F112, F5
     

F112 series FAG bearing flange. F112 series bearing inner ring widen for 112 series self-aligning ball bearings. F11204 to F11208 bearing flange at one end can not be blue polyamide (nylon) cover, cover also play a role in sealing. With the same bearing used in the past, the larger F112 series bearing cast iron end caps and blankets are also used seals.
   

 F5 Series flanged housing, F5 series flange bearings for tapered whole aligning ball bearings, drum-shaped roller bearings and spherical roller bearings. Through the sleeve bearing fixed to the shaft. FAG Bearings offers both closed at one end bearing (A type), also through the shaft - both ends of the development bearing (B type).
    

Typically, the manufacture of the bearing shell with the surface should be guaranteed to have a certain displacement, for example, they can swim bearings. FAG Bearings installation listed in the table by the retaining ring into the bearing to get. According to different working conditions, housing can contact seals, non-contact seals or seal hybrid.



Other News:
FAG bearing the seat and flanged housing
Rings of normalizing
Bearings to grease cleaning instructions
How to extend bearing life three principles
Electromagnetic stirring on the quality of bearing steel slab
Bearing greasing method and rigidity
Bearing precision guide rail automatic post principles
The rolling bearing or sliding NSK bearing assembly into a whole