Spherical Bearings Series description:
Spherical ball bearings deep groove ball bearing is actually a variant, characterized by its outer diameter surface of the sphere, can be blended with the corresponding concave spherical bearing self-aligning role to play within.
Although its basic performance and deep groove ball bearings should be similar, but because most of the bearings used in the rough mechanical, the installation location is not precise enough, shaft and housing bore axis of the poor of neutral or long axis of the deflection and large the case, and the precision of the bearing itself is not high enough, some structures are more rough, so the actual performance were relatively the same performance specifications of the deep groove ball bearings play on a considerable discount. For example, with the top wire of the outer spherical ball bearings used through the large stiffness difference deflection shaft, the bearings on both sides with a ring, can be tight to prevent dirt intrusion, the factory had the right amount of lubricant filled, no cleaning prior to installation, do not need additional lubricant, bearing inner ring protruding wire on the top end of the shaft screw fastening. Permissible axial load should not exceed 20% of the rated dynamic load.
With eccentric sleeve and the outer spherical ball bearing with spherical bearings top wire of the same performance, but not on the top wire on the inner ring, but in the eccentric sleeve. Tapered bore spherical ball bearing with 1:12 tapered bore of the tapered hole, can be installed directly on the tapered shaft, or through adapter bushing installed on the optical axis in the absence of shoulder, and fine-tune the bearing clearance.



Other News:
SKF bearing is available judgment
Spherical Bearings Series Introduction
The bearing block uses and advantages
Installed within the cylindrical bearings
Rolling bearing steel profile
Bearing quality standards
Linear bearing series introduced
NACHI bearing installation: