1 to adjust the bearing clearance
Adjustment methods: (1) bearing cap and the base of the gasket thickness adjustment;
screws to adjust the bearing outer ring gland movement.
2 bearing preload
Objective: To improve accuracy, rigidity and reduce vibration.
Installation requirements according to the bearing preload in the bearing to maintain a certain axial force to ensure a certain clearance,
3 to adjust the position bearing combination
The shaft parts (gears, pulleys, etc.) work with the exact location.
3 with rolling bearings
Bearing inner ring bore and shaft system using the base hole;
Bearing outer ring and the bearing hole with the use of the base axis system.
4 rolling bearings of the Assembly and Disassembly
l design life of rolling bearings is usually inconsistent with the machine needs to be replaced several times during use, when and bearing assembly relationship between the damaged parts need to be demolished on the bearing, the bearing should be the removal forces demolished without rolling pass, to prevent the rolling plastic deformation.
Special bearing removal tool commonly used to design the shaft structured to be used as a tool for the space was sufficient, these data can be found in the manual rolling.
 



Other News:
Combination of adjustment of the bearing
Bearing steel with ultra-clean production technology
Combination of rolling bearing design
Rolling bearing measurement methods
Single row deep groove ball bearing mainly uses
Thrust Bearing Features
The principle of self-lubricating bearings
Non-standard bearing characteristics