Rolling: The bearing load and relative motion of the parts to each other intercropping rolling motion of the bearing, which includes parts and raceway with or without isolation or guide pieces of rolling element, Can be used to bear radial, axial or radial and axial joint load.

Angular contact bearings: ball and the ring are greater than the nominal contact angle 0 °, but less than 90 ° of the rolling bearing.

Spherical bearings: a spherical and a wide inner ring with a locking pieces bearing to the heart. Used primarily for the simple case.

Linear motion bearings: two on the raceway at the rolling direction are relatively linear motion bearings.

Ball bearings: rolling body is ball bearing.

Deep groove ball bearings: a cross-section of each ring are about one-third of the circumference of the ball groove type raceway for continuous radial ball bearings.

Thrust ball bearings: rolling the ball thrust bearing.

Roller bearings: roller is a roller bearing.

Cylindrical roller bearings: rolling body is a cylindrical roller bearing to the heart.

Tapered roller bearings: rolling body is tapered roller bearing to the heart.

Needle Roller Bearings: needle roller bearing to the heart is.

Spherical roller bearings: rolling body is convex or concave spherical roller bearing heart yearned for the tone. A convex spherical roller bearings, spherical-shaped outer ring with raceway; a concave roller bearings, the inner ring has a spherical raceway.

Thrust roller bearings: roller is a roller thrust bearing.

Thrust cylindrical roller bearings: rolling body is cylindrical roller thrust bearing.

Thrust tapered roller bearings: rolling body is tapered roller thrust bearing.

Thrust Needle Roller Bearings: needle roller thrust bearing is.

Axial spherical roller bearings: rolling body is convex or concave spherical self-aligning roller thrust bearing. A convex spherical roller bearing ring raceway is spherical-shaped, concave spherical roller bearing shaft washer raceway is spherical shaped.

Bearings: Radial bearing seat together with a component parallel with the axis of the support bearing on the surface of the base plate mounting screws.



Other News:
Bearing category
Bearing the model and supporting sign
Fabrication and installation of the correct mill cast main bearing bush
Bearing surface grinding causes defects
Static seal
Explanation of the basic production process of rolling bearings
Improve the corrosion resistance of phosphate fasteners
Bearing iron roller removes rust and anti-rust techniques