A, the period applicable and maintenance

1. Pay attention to each instrument often observed instructions, the abnormal should be to stop in time to be excluded, in reason not found, before fault has not been ruled out should be stopped work.

2. Pay attention to the work load period, integration of the work load during half don't more than 60% of the rated load, and will arrange for workload, prevent machine long time continuous operation caused by the occurrence of the overheating.

3.Often attention to check the oil, hydraulic oil, cooling fluid, brake fluid and fuel oil (water)  and quality, and check the sealing machine. Check the oil and water lack found in too much, reason should be analyzed. At the same time, should reinforce all lubricating points lubrication, the proposal in the break-in period, intending to filling grease lubrication point (special request except).

4. Adjust period ended, the machine to compulsory maintenance, completes the inspection and adjustment, and pay attention to the oil change.

5. Because of engineering machinery is special vehicles, operators shall accept the manufacturer train, guide, to the structure of the machine, performance have full understanding , and access to certain operating and maintenance experience can operate the machine. The manufacturers to provide the product use maintenance instruction "is the operator of the operating equipment necessary material, in before operation, be sure to read the use of maintenance instruction", according to the requirements for operation maintenance.

 
6. Keep the machines clean, adjust, tighten loose parts in case for loose and aggravate wear parts or lead to the loss of spare parts.



Other News:
How to spend run-in period of the loader
Activation on pre-treatment and polishing
Friction and lubrication
Double row tandem bearing
How to lubricate bearing,slideway, gear ?
Special bearings lubrication
Different kinds of bearing treatment methods
Three major features of the spiral bearing