1, bearing installation

The installation of the bearing is correct, affecting precision, long life, performance. Therefore, design and assembly department for the installation of the bearing should fully research. Hope according to the standard installation . The project operation standard usually are as follows:

(1) cleaning bearing and bearing parts relation

(2) check the link size of the components and finishing

(3) the installation

(4) the check after installed bearing

(5) supply lubricant

2, the adjustment, straightening

In bearing fitted to the later, if not careful the accurate, straightening may lead to suffer another load bearing, friction and vibration. These may accelerate fatigue and reduce the service life of the bearings, and could damage other machine parts use period. In addition, the vibration and friction might increase greatly increase the energy consumption and premature failure risk.

3, basic condition monitoring

In use period, usually on the bearing the basic operation external condition monitoring, such as temperature, vibration and noise measurement, etc. These regular inspection will early detection of potential problems and will prevent unexpected machine to suspend the phenomenon, make the production plan can be realized, improve productivity and efficiency of the factory.

4, re-lubrication

In the process of operation, bearing requirements have the correct re-lubrication , perfect its performance. Bearing the lubrication method, divided into grease lubrication and oil lubrication. In order to make the bearing good use function, first of all, want to choose to suit the using conditions, use the purpose of lubrication method. If only consider lubrication, oil lubrication lubricity dominant. But can be simplified bearing grease lubrication have around the specialty of structure.

5, remove

When it reaches its bearing will eventually use period of time, it should be replaced. Although the bearing can no longer be used, but right off the original bearing, timely replace new bearing, the new bearings use the life extension can play a positive role. First of all, to the proper to unload the method of tool use will help prevent the damage of the components for the other machine, second, not correct the landed technology may cause harm to the operator.
 



Other News:
Bearing used life cycle extended method
Auto-hub bearing maintenance
Ten ways identify authenticity of FAG bearing
Hollow shaft and rolling bearing assembly
bearing choose elements
SKF bearing in oil seal and axis exist the oil seal of oil film control
How is the rolling bearing collar to form?
Water pump bearing maintenance