1 water-based, quality of work rust

Because of kerosene prices up cleaning agents, so many bearing enterprise are in the trial of water-based detergent. But, because of the present market condition water-based detergent products pass away the sham as the genuine, quality is uneven, so to some users to bring a lot of economic losses, but also in some extent added users of the confusion.

In fact, bearing manufacturer worry is understandable. Because, water-based bearing cleaning most key of rust and crystallization. Relative to the crystallization is concerned, water-based cleaners of rust problem is very important. We usually let customers 4 KG test of the small kind, let users at normal temperature with the tap water do first try. If the trials are successful small kind, just can batch process in between small parts. If the experiment is successful small, so the user can test of water, the main anion content to see whether exceed bid, and then based on the users of water, increase or decrease of related products ratio, for field of joash, know to user satisfactory results. Generally speaking, between the working procedure of cleaning water base antirust effect, in does not add any rust water (oil) conditions, at least should ensure that more than three days. Only if the user cannot use the water quality of the case, just can use deionized water. So, that kind of have to let customers use deionized water cleaning water base is irresponsible to manufacturers, at least in bearing parts clean process fastening on users don't have water conditions. From our analysis of the situation, the use of groundwater except for some users find some water quality problem, most users are can use of water.

2 the cleaning process technology of water-based improvement

 
Use a water-based cleaners of important problem is bearing processing operations process improvement. In order to better use water-based detergent cleaning effect, must be in selecting quality of choose and buy water-based while supporting high quality of cleaning equipment. The international advanced bearing of the manufacturer of the typical process of cleaning system is bearing the scheme. From bearing processing start cleaning, this concept is in bearing parts heat treatment began, car after processing to clean (especially those with seal grooves dustproof slot rings, once at the assembly is difficult to clean), after grinding to clean, let want to clean after. In the assembly, bearing parts is very clean. Bearing assembly parts should choose before cleaning to add temperature control device of mild cleaner, clean water to pass tests and sampling, the configuration of the detergent and water samples to adapt, the cleaning trough to have every oil structure, the cleaning trough to have oil displacement type rust, replacement down underwater to have to water mouth or automatic drain institutions, the cleaning trough and replacement of the medium tank must have filter device, if the airing, the use of air to dry filtering. Only in this way, the bearing can thoroughly clean.



Other News:
The structure of Cylindrical Roller Bearings
How to choose water-based bearing detergent?
Bearings rolling analysis produced the temperature too high and the noise failur
Lead to sliding import bearings early wear reason are summed up and has the foll
Spindle bearing oil characteristics and application
German Ziegler Companies Use SKF Bearings
Basic knowledge of rolling beatings
The common types of insert bearing