The installation of the bearing is correct, affecting precision, long life, a performance. Therefore, design and assembly department for the installation of the bearing should fully research. Hope according to the standard installation work. The project operation standard usually are as follows:

< 1 >. Cleaning bearing and bearing parts relation

< 2 >. Check the link the size of the components and finishing

< 3 >. Installation

< 4 >. Installed bearing the check after

< 5 >. Supply lubricant

Hope that in the coming before installation, have opened the bearing packaging. General grease lubrication, not to clean, direct filling grease. Lubricating oil, also need not ordinary cleaning, but, with the high speed bearings or instrument with to wash with clean oil, remove the rust on besmear in bearing. Remove rust bearing, easy to rust, so cannot place no heed. Moreover, already sealing grease into the bearings, not to clean use directly.

The installation method of bearing, for bearing structure, cooperate, conditions and different, generally, it is because for axis rotation, so inner circle over surplus to cooperate. Cylindrical holes bearing, multi-purpose pressed into the press, or use hot charging method. Cone hole occasions, installed directly to the taper axis, or with the sleeve installation.

 
Installation to shell, with general clearance, outer ring had surplus quantity, usually with pressed into the press, or have after cooling method of installation with cold. With dry ice for cooling agent with the occasion of installation cold, moisture from the air will be condensed in the surface of the bearing. So, need appropriate antirust measures.
 



Other News:
Development of German INA linear guide and Japanese NSK ball screw trend
The installation of the bearing
FAG bearing grease filling can be done in a long time after should be added
F&F bearing remove should pay attention to the problem
Detection of bearing
High speed precision angle contact ball bearing installation method
To maintain a clean and replace the lubricant NSK bearings is to extend the life
Double row angular contact ball bearing the suffix code instruction