Commonly method of adjust radial FAG bearings are as follows:

1 of cylindrical and oval, location of lateral clearance and heat treatment technology analysis of bearing can be manually shave or research in the face and bearing points mat after turning the blow of the adjustment method.

2, to the top of the bush and elliptic cylindrical gap, can be manually shave or situation allow research on the bearing surface and cushion of a share of the adjustment method.

The much oil wedge fixed axle bush, in principle is not allowed blowing and adjust the bearing clearance, not a timely clearance should be replaced new watts.

4, to much oil wedge tilt type bearings, don't allow the WaKuai scraping, the author: bearing fault inspection and the failure reasons of clearance not timely because WaKuai should be replaced. On thickness adjustable WaKuai, can pass on the adjustment with stainless steel under behind of mat, or thinning of the method of adjusting thickness adjustment of watts. Pay attention to much oil wedge tilt type bearings, WaKuai thickness error between the group should be less than 0.01 mm.



Other News:
SKF bearing and UBC established long-termand stable business relations
The method of adjust radial FAG bearing clearance
Tight set and discharge set for installation in the hole with cone NSK bearing t
CHF reappear the weak date and vebal role intervention
NSK bearing cement mechinery failure analysis and processing
The poor population in US 52 years high
SKF bearings installed how to detect whether proper
Floods continue to approximation Bangkok downtown