Purchase and use of seals, the user should always pay attention to the following requirements to avoid unnecessary quality issues:
1 of production
After a rigorous selection and long-term accumulation of experience, we have produced a series of sources of supply, our supplier is the seal industry's most comprehensive in terms of production quality, to guard, remained stable the level of quality. Combined with our insistence on the quality of the seals, not the blind pursuit of high profits at the expense of customers' requirements on the quality of the seals.
2 Storage
If we stand on the position of customers, to produce the seals, you must pay attention to the supplier or seal the store know how to take care of the seals, if the supplier is not stored properly, to the customer, may be scrapped seals, because the store seals, is a set of specific requirements, such as storage at room temperature preferably below 30 degrees Celsius to avoid seals to produce high-temperature aging; seals must be stored in a sealed package to avoid contact with moisture in the air or dust; seals must avoid bright light, to avoid the seals air ozone erosion or premature aging, so we advise our clients in the choice of supplier procurement, must look at the seals for storage properly, otherwise the plant regardless of the seals can provide quality seals, to the customer may only have been abandoned seals.
(3) Design
In the use of high-quality seals at the same time, many customers in order to reduce costs, selected in part of orientation and dust the lower end products, resulting asked to mention destruction of the rod seal leakage because the fuel tank swing or foreign debris, to consult the relevant product, to avoid wasting a high-quality seals the case.
4 Installation
The most important issues when installing seals to avoid seal damage, remove the burr, the right tools, in addition to a suitable finish, safe chamfering, and how to avoid the dust drift falls sealing surface on his way to the installation, When installed, such as piston to win the title on how to properly placed to avoid crushed seals, clean hydraulic media, if you have any questions, we can I seal the factory is clear and simple installation instructions.
(5) Use
Often supporting the user after the completion of the process, equipment, even if passed the test, sent to the users still have problems after using for some days, under normal circumstances, may be caused by improper use, such as oil temperature is too high leading to seal burned. can check the cooling system is operating properly, the rod surface wear and leaks, No debris can check the hydraulic oil filter whether the failure.
Be seen from the above circumstances, even if the user is willing to pay a higher price for high-quality seals, but also in all respects to the control and monitoring, in order to protect the pay of the investment will not be wasted, choose a professional production house, long-term partnerships, necessary



Other News:
How to choose and buy and use seals
The combination of the rolling bearing structure design
Bearing axial clearance adjustment
Bearing life of intensifying test
Gas lubricating mechanical seals use not contact
SKF grease all of the important for applications
Surface thrust bearing loose ring installation method
Motor bearing overheating reasons and processing methods