1. The shaft shoulder fixed
Bearing inner circle rely on shaft shoulder and realize the axial fixed interference.
Apply to both ends of the fixed supporting structure.
Simple structure, the profile of small size.
2. Elastic block circle fixed
Bearing inner circle by shaft shoulder and lock nut realize axial fixation.
Can not bear the two-way axial load.
Axial structure of small size.
3. Lock nut fixed
Bearing inner circle by shaft shoulder and lock nut realize axial fixation. And the dynamic gasket against pine, safe, reliable, and suitable for high speed and heavy-load occasion.
4. End thrust washers fixed
Bearing inner circle and the axial shaft shoulder by the axial fixed block circle realize. The shaft block circle in the shaft with screws. Fixed screw should have against pine device.
Apply to the axis should not be cut the thread or space is restricted occasion.
5. Tight set set of fixed
Rely on tight set set inside hole radial dimensions of compressed and clamping on the shaft, to realize the bearing inner circle of the axial fixation.
6. Out of unloading fixed
Discharge of clamping set back the same way and the tight set set. But out of discharge due to have special nuts, bearing loading and unloading convenient, applicable to radial load is bigger, axial load low double row spherical bearing in fixed axis.




Other News:
Common bearing inner ring fixed way
Sliding bearing the electroplating of the new process of reducing friction (3)
Common bearing outer ring fixed way
Sliding bearing the failure reasons of (1)
Bearing temperature and high performance characteristics and application of grea
Cylindrical aperture to heart bearings of loading and unloading
Rolling bearing parts production characteristics
Bearing in the model and auxiliary mark