6. Since the lubrication Angle contact joint bearings
GAC... F type outer ring for hardened bearing steel; Sliding surface with ptfe as additive for the glass fiber reinforced plastic; Inner circle for hardened bearing steel, sliding surface hard chromium plating. Can bear radial load and a direction of the axial load (joint).
7. Since the lubrication thrust joint bearings
GX... F type a lap is hardened bearing steel, sliding surface with ptfe as additive for the glass fiber reinforced plastic, shaft lap is hardened bearing steel, sliding surface hard chromium plating. Can bear a direction of the axial load or joint load (since this time radial load value must not be more than axial load value of 0.5 times).
8. Lubricated stem end joint bearings
(1) SI... C is CE... C type bearings and the stem assembly body. With female threaded rod ends, materials for carbon steels. Can withstand the direction the same load. In the bear radial load at any direction under less than or equal to 0.2 times radial load of the axial load.
(2) SA... C is CE... C type bearings and the stem assembly body. Rod ends with the male, materials for carbon steels. Can withstand the direction the same load. In the bear radial load at any direction under less than or equal to 0.2 times radial load of the axial load.
(3) SI... CS-2 Z style is GE... CS-2 Z type bearings and the stem assembly body. With female threaded rod ends, materials for carbon steels. In the bear radial load at any direction under less than or equal to 0.2 times radial load of the axial load.
(4) SA... CS-2 Z style is GE... CS-2 Z type bearings and the stem assembly body. Rod ends with the male, materials for carbon steels. Can withstand the direction the same load. In the bear radial load at any direction under less than or equal to 0.2 times radial load of the axial load.
(5) SIB... C with female threaded rod ends, materials for carbon steels, sliding surface for sintering bronze composite materials; Inner circle for hardened bearing steel, sliding surface hard chromium plating. Can withstand the direction invariable radial load.
(6) SAB... C type rod ends with the male, materials for carbon steels, sliding surface for sintering bronze composite materials; Inner circle for hardened bearing steel, sliding surface hard chromium plating. Can withstand the direction invariable radial load.
(7) SIB... F type with female threaded rod ends, materials for carbon steels, sliding surface for with ptfe for the glass fiber reinforced plastic additives; Inner circle for hardened bearing steel, sliding surface hard chromium plating. Can withstand the direction invariable radial load.
(8) SAB... F type rod ends with the male, materials for carbon steels, sliding surface for with ptfe for the glass fiber reinforced plastic additives; Inner circle for hardened bearing steel sliding surface hard chromium plating. Can withstand the direction invariable radial load.
(9) SQ... L by special self-lubricating alloy material to make, can bear radial load and any direction of smaller axial load.




Other News:
Forging process of defects
Made of copper alloy oil-retaining bearing
The characteristics of the joint bearings (3)
Agricultural motor in the operation of the monitoring should be seven projects
Machine tools and machine tool lubrication oil (fat) performance requirements
Bearing nylon maintains a several opinions
Guide design matters
The determination of rings processing methods