SKF Single Row Cylindrical Roller Bearings (N205EC) The rollers in a single row cylindrical roller bearing are always guided between the integral "open" flanges on one of the rings. These "open" flanges combined with the specially designed and surface treated roller ends, provide improved lubrication, reduced friction and consequently lower operating temperature. The ring with the integral flanges together with the cylindrical roller and cage assembly can be separated from the other ring.

SKF Steel Single Direction Thrust Ball Bearings Single direction thrust ball bearings SKF single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately. Smaller sizes are available with either a flat seat surface on the housing washer or a sphered seat surface.

For Single-Direction Thrust Ball Bearings Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.

FAG Steel Self-Aligning Ball Bearings (1303 ETN9) The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing. It is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected. Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings,

Self-aligning ball bearings 1. Ball bearings brand: SKF, NSK, FAG, NTN, NACHI, EZO 2. Ball bearings types: Deep groove ball bearings, Angular contact ball bearings, Self-aligning ball bearings, Thrust ball bearings 3. Bearing range: 60series:  606, 607, 608,  6000, 6001, 6002, 6003, 6004, 6005, 6006, 6007, 6008, 6009, 6010, 6011,  6012, 6013, 6014, 6015 62series: 626, 627, 628, 629, 6200, 6201, 6202, 6203, 6204, 6205, 6206, 6207, 6208, 6209, 6210,

High precision SKF single row angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. Those commonly used and included in this catalogue are Single row angular contact ball bearings Double row angular contact ball bearings Four-point contact ball bearings 1)Material: Gcr15, Gcr15SiMn 2)Cage Material: Brass, steel 3)Quality standard: ISO9001 4)Noise standard: Z1, Z2, Z3, Z4 5)

SKF Double Row Angular Contact Ball Bearings 7304 BEP Double row angular contact ball bearings correspond in design to two single row angular contact ball bearings but take up less axial space. They can accommodate radial loads as well as axial loads acting in both directions. They provide stiff bearing arrangements and are able to accommodate tilting moments. SKF produces double row angular contact ball bearings in several designs depending on size and application.

SKF Four-Point Contact Ball Bearings QJ 308 N2MA Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads acting in both directions. Radial loads can be supported up to a certain fraction of the axial load. These bearings take up considerably less axial space than double row bearings. SKF four-point contact ball bearings of the QJ design have a contact angle of either 35° Or 45° .