Regular inspection of the bearings, bearings in the best condition for the maintenance is very important work, you can also find problems reflected. Bearing in use on the precautions and knowledge. First of all, we want to stress is to keep the NSK bearing lubrication and clean is very important. So when we check NSK Bearings should be obtained before cleaning the surface of NSK bearings, and bearing surrounding the demolition of parts.

The six types of ball bearings: 1. Three point contact ball bearing Single row angular contact ball bearings when subject to pure radial loads, each load of the ball by two contacts with a channel, but with little contact with the other channel. Under pure axial load, each ball with only one contact with each channel. Two. Locking counterbored ball bearing ball bearings Outer ring of a rib removed all or part of the groove-type ball bearings.

Spiral bearing three characteristics:1. The main advantage of spiral bearing outer ring can be reused many times, making the event as due to the damage caused by the impact of temperature and bending to its re-processing possible. In this case, bearing also need to be adjusted. Structural design of such structures, not only spiral package bearing the outer ring needs to be change, all the other bearing components can be used again.

Follow the method of Roller Bearing Mill, in the hollow shaft and the Roller Bearing installation form more unreasonable to use the factory mill operation in the future work to bring some disadvantages. To solve this problem, we offer you the mill the best hollow shaft Roller Bearing assembly installation method.  Industrial use of fine grinding mill with Roller Bearings have been widely in China to promote and save the power consumption,

Today, demands the right to use life, equivalent load, shaft speed and improve the reliability of any correction factor can be used to calculate with the required load bearing capacity. Where: C = dynamic load rating required capacity, N = Shaft speed, r / min  Rolling contact type θ = dimensionless index L = L required service life, h P = bearing equivalent load, N Point contact (ball bearings) or line contact (roller bearings). On ball bearings: θ = 3. 00,

Roller Bearing type many, the structure type, tolerance level, material selection and processing methods are different, but the basic manufacturing process contains the following:   Bearing parts manufacturer - bearing parts inspection - bearing parts demagnetization, cleaning, rust - bearing assembly - Bearing product inspection - bearing product demagnetization, cleaning - packing fight oiled bearings finished product storage.

Nsk bearing motor produces rust are complex and may be bearing rust handled properly, water may be caused by corrosion, and corrosion caused by the mist. Most electrical insulation used in paint factories out of the acid volatile There are four main components: ① the reaction of low molecular weight did not paint the acid composition (anhydrous different o-and p-phthalic acid, anhydrous maleic acid, trans- maleic acid). ② paint curing the resulting acid composition (phenolic degeneration paint,

The use of bearings, the noise is very normal. Even bearing in the low-noise bearings have the same situation.Why would noise pollution? (1) roller bearing noise and its control Roller bearing noise when running, the ball rolling in the roller surface slippery issued a continuous sound, all bearing unique to occur the basic sound. That is, the general sound of roller bearings sound with other sounds. Roller ball bearings sound is irregular,