1, bearing inspection and repair technology1, ntn bearing cleaning Bearing Maintenance imported under demolition, the first recorded appearance of bearing, lubricant residue confirmation sampling after checking with the lubricant, cleaning bearings. As cleaning agents, general use gasoline, kerosene. Remove the bearings to cleaning, sub-rough cleansing and washing small fine, were in the container, first put metal mesh bottom,

FAG Bearing of physical characterization of a vibration displacement, velocity, acceleration of three.FAG Bearings by the design parameters identified stiffness, flexibility, quality, and damping vibration system posed by conditions in the operation phase will have to adapt to its mechanical vibration.Manufacturing and processing of the error caused by vibration, the smaller the deviation, vibration smaller.

fag bearings running smooth running strong mechanical protection and the premise that we should pay attention to the process of using the future maintenance of your bearings.1, fag bearings must be standardized, see instructions before use. fag bearing instructions and sample can be obtained from Tianjin imported bearings Meites;Second, fag bearings must be inspected regularly during maintenance

1: ntn bearing nature of the noise:1. Rolling sound and control the impact of large models of ball bearings or cylindrical roller bearings ntn pure radial load low speed operation, due to the centrifugal force rolling small area in the non-load rolling element will impact or roller and cage noises. But with the speed increase, this sound will disappear. Impact of sound on the ball control methods: the radial clearance appropriate to reduce the use of reasonable structure of the material is supple nature of the bearing cage.

1, plastic bearings and the phenomenon does not occur in rust resistant and rust metal bearing can not be used for chemical liquid;
2, plastic bearings are lubricated materials overall, long life; while FAG bearings lubricated metal sliding surface layer is only 0.003mm of PTFE, a thin layer of friction when it finished pluralism and the end of life;3, plastic ntn Bearing manufacturing cost is lower than the metal;

1: ntn bearing raceway noise:1. To avoid the rolling force on adoption, which requires assembly and disassembly inner ring (shaft loop), through the force on the inner ring, outer ring assembly and disassembly time) by force on the outer ring.2. Drag force due to continue until the extent of, for example, when installing the bearing mounted in the bearing to the right location just stop3. Force on the size of the appropriate steady uniform should not have impact,

The main features of one-way bearing Description: One-way bearings used powder metallurgy forming and sintering metal powders (or metal powder and metal powder mixture) technology made products. In the study the characteristics of powder characteristics and process changes based on the corresponding technical process used to change the shape of powder, performance and their organizational structure and adapt to the different needs of bearing products.
 

1: ntn bearing cage material:ntn bearing cage material, the use of low carbon steel. According to different uses, also used yellow copper, stainless steel plate. Cut to cage materials, use of high strength brass, carbon steel, in addition also has the use of synthetic resin.Mechanical strength, good dimensional stability, will also need good processing. According to different uses, as well as requirements of its impact resistance, heat resistance, good corrosion resistance.